Tips and Free Stuff


About Us

Buying Procedure




10x Magnification of connector

This component was soldered under a stereo microscope at 10x magnification. The pins are 0.5mm apart. If you make a mistake you will either make a dry joint, short between 2 or more pins (very difficult to fix) and or you will melt the fragile white plastic. Any mistake like this and you will probably have to throw away the circuit board. If you take a chance you might permanently damage the GSM module that plugs in onto the connector.  Have I mentioned that the connector must first be placed EXACTLY where it should go, not 0.5mm this or that way, otherwise the module won't fit correctly.


Home     Products      Services   Zerksus.com    News  Tips and Free Stuff    Datasheets    About Us   Buying Procedure Exchange Rates    Last Updated: 2009/02/03

2006- 2009 Zerksus Engineering CC.  Fax: +27 86 684 3042.    info@zerksus.com    Privacy Policy    Terms and Conditions                  Credit cards  accepted via www.setcom.com